How To Change Sharp Aquos From Analog To Digital

background image

CH Setup

If initial setup does not memorize all the channels in
your region, follow the instructions below to manually
memorize the channels.

Air/Cable: Brand sure what kind of connexion is fabricated

with your Boob tube when selecting "Air" or "Cablevision".

CH Search: Channel auto search makes the Tv set look for

all channels viewable in the set expanse.

CH Retentivity: You lot can select the channels to skip in each

ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and
DIGITAL (Cable).

On: Skips channels. (Channel selection disabled using CH

r/s.)

Off: Does not skip channels. (Channel option enabled using

CHr/s.)

Remove Scrambled CH: This function makes the Television

await for and and so delete digital cable channels that
are scrambled and so unavailable in the set expanse. The
process may take more than xx minutes.

Yes: Starts to remove scrambled channels.

No: This role does not work.

See "Initial Setup" on page 14 for setting each item.
If no channel is found, confi rm the type of connection made
with your TV and try channel search again.
If you select "Analog Search Outset" and initiate the channel
search, the CH Memory for Cable Digital will be deleted.

Antenna Setup-DIGITAL

In social club to receive digital air broadcasts, yous need
a digital circulate antenna. Yous tin can confi rm the
antenna confi guration through the "Antenna Setup-
DIGITAL" screen. If necessary, arrange the direction of
the antenna to obtain the maximum signal strength.

Signal Strength: The signal force of DIGITAL channel

is displayed. The signal information is based on the
current channel.

Channel Strength: Input the 2-digit channel number

to check the betoken strength of the selected channel.
Brand sure the signal is strong plenty for each
aqueduct.

This function is available for DIGITAL (Air) only.

Input Skip

This setting allows you to skip the HDMI or PC-IN Input
("Input iv (PC)", "Input v (HDMI)", "Input 6 (HDMI)",
"Input 7 (HDMI)", "Input 8 (HDMI)" and "Input nine (HDMI)")
on the Input Selection operation.

Yes: Skips the input.
No: Does not skip input.

Input Characterization

Lets yous set the input final displayed when using
the INPUT SOURCE menu or channel display. Press
a/b/c/d to select the new name for the input
style.

You cannot change labels if the INPUT SOURCE is Goggle box.

•
•

•

Input Signal
(for Analog PC Input Mode Simply)

Some input signals may have to be registered manually
to display properly. The pair of input signals (resolutions)
in the list beneath is not distinguishable when received.
In such a example, you accept to gear up the correct signal
manually. After setting in one case, it will display when the
same betoken (resolution) is input over again.

1024 x 768

1360 x 768

You tin can but select the "Input Point" on the Setup carte du jour
when receiving one of the 2 input signals listed higher up.

Car Sync.
(for Analog PC Input Mode Only)

For automatically adjusting the PC epitome.

Yes: Auto Sync. starts and "Now adjusting the image."

displays.

No: This role does non work.

When Automobile Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
Automobile Sync. may fail even if "Completed" displays.
Auto Sync. may neglect if the calculator prototype has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
Exist certain to connect the PC to the TV and switch it on before
starting Automobile Sync.

Fine Sync.

Ordinarily you tin can easily adjust the pic as
necessary to modify image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.

H-Pos.: Centers the image by moving it to the left or

right.

5-Pos.: Centers the prototype by moving it upwards or downward.
Clock: Adjust when the image fl ickers with vertical

stripes.

Phase: Suit when characters take low contrast or

when the image fl ickers.

For resetting all Fine Sync. aligning items to the factory
preset values, press

a/b to select "Reset", and then printing

ENTER.
Information technology is not necessary to conform the "Clock" or "Phase" when a
digital signal is being input, so it cannot be selected.
The default cursor position may not be in the eye,
because the screen position variable ranges may be
asymmetrical.
The screen position variable ranges depend on the View
Mode or the point type. The ranges can be seen on the
position-setting screen.

•

•
•

•

On-Screen Display Carte